SHENZHEN YYBLED TECHNOLOGY CO., LTD.
Direct Line: 0086-0755-83207420        E-mail: Brank.youth.yang@hotmail.com        WhatsApp:008613427874236

SHENZHEN YYBLED TECHNOLOGY CO., LTD.

Direct Line: 0086-0755-83207420
E-mail: Brank.youth.yang@hotmail.com
WhatsApp:008613427874236
Introduce the parameter value of LED light source module

2022-02-18

 


LED light source module parameters:

 

 

1. Luminous flux classification: Luminous flux value is an indicator that LED users are very concerned about. LED application customers must know which range of LED luminous flux they use, so as to ensure the uniformity and consistency of their product brightness.

 

 

2. Reverse leakage current test: The reverse leakage current should be lower than the required value under a certain voltage. The LED reverse leakage current is too high due to static electricity, chip quality and other factors during the production process, which will give the LED light source Modules bury great hidden dangers, and it is easy to cause LED dead lights after using for a period of time.

 

 

3. Forward voltage test: The range of forward voltage must be within the allowable range of the circuit design. Many customers design to drive the LED to light up in the form of voltage. The magnitude of the forward voltage directly affects the change of the overall parameters of the circuit, thus Will bring hidden dangers to product quality. In addition, for some products that require circuit power consumption, it is desirable to ensure that the forward voltage is as low as possible under the same luminous efficiency.

 

 

4. Relative color temperature classification: The color temperature of white LEDs is a parameter that is used more in the color industry. This parameter can directly show whether the color of the LED is warm, cold, or white.

 

 

5. Chromaticity coordinate x, y bin: For white light or monochromatic light, chromaticity parameters can be used to express which color area the LED is in. Generally, four points x, y are required to determine a chromaticity area. Certain test methods must be used to ensure whether the LED falls within the required four-point x, y chromaticity area.

 

 

6. Dominant wavelength binning: For monochromatic LEDs, the dominant wavelength is an important indicator to measure its color parameters, and the dominant wavelength directly reflects the human eye's visual perception of the light of the LED.

 

 

7. Color rendering index classification: The color rendering index is directly closed to the degree of discoloration of the object on the object when the light is irradiated. This parameter is very important for LED lighting products.