5050 package size: 5mm*5mm*1.6mm, the light intensity can reach 5500-6000MCD (pure white light, slightly smaller for warm light). Its working voltage is the same as ordinary led, only 3.2-3.4V, and the current is the same 60MA.

Because the size of 5050 SMD LED is relatively small and the workmanship is relatively fine, manual welding is not convenient, but it does not mean that it cannot be welded. The welding temperature should be controlled within 250 degrees, otherwise the more expensive 5050 SMD LED will be burnt.

Because the parameters of 5050 SMD led determine that it must be a popular led, so it is often used in high-end civil energy-saving lamps, automotive dashboards, led light strips, mobile phone backlights and buttons, instrument backlights and small-sized LEDs The products, LED backlight, flat backlight of switches and signs, caller ID, flash, automobile, audio, indoor display, lighting market!

PowerEdit

The larger the current, the higher the voltage, the higher the temperature, the smaller the current, the light-emitting angle: 125 degrees, etc.,

The forward current is 60mA, and the maximum reverse voltage cannot exceed 5V.

The best working temperature is -35～+60℃. If the problem of light decay life is not considered, it can also work below +85 degrees.

Power: 0.18W (same power as 0.2W on the market)

DescriptionEdit

1. Current: 43-46mA (this is the most ideal driving current); the maximum current can not exceed 60mA;

2. The voltage is 2.8-3.6V (the instantaneous voltage of the lamp bead should not exceed 5V, or the LED lamp bead will be damaged or seriously damaged and cannot be repaired);

3. The ambient temperature is -20℃～+40℃ (the heat dissipation design of the lamps is required to be better, and the temperature of the LED lamp pins cannot exceed 60 degrees);

4. If the current is 14-20mA, the brightness will decrease by 4% for every 1mA current reduction;

5. The current is 0.12W at 43-46mA, 0.15W at 46-53mA, and 0.18W at 54-60mA;

6. Low power consumption

7. Long service life