1. In the position where the LED high bay light needs to be installed, first preset the hook. It should be noted that the hook should be used together with the lifting ring. In addition, the bearing capacity of the hook should be guaranteed to be above 30Kg during installation.

2. Snap the lifting ring on the LED high bay light into the set hook, and then hoist the lamp through the lifting ring.

3. Then connect the power cord drawn from the site to the power cord of the luminaire, connect it according to the wiring principle of the luminaire, and do a good job of waterproofing and insulation.

4. After turning on the power supply, it is necessary to observe whether the led high bay light can work normally, and the installation can only be regarded as completed after confirming that there is no problem.