Design Features

-High Quality 3030SMD LED mounted, golden wire with copper base;;

-ABS fire retardant engineering material housing, safe and reliable.

-Constant voltage circuit for flexible cut the module string;

-Aluminum PCB with 1.5mm thickness, fast heat dissipation;

-Maximum module quantity per string up to 20pcs;

-Optical lens of 10°*60 °degree Angle for double layer light box back lighting;

-Maximum module quantity per string up to 20pcs;

-Center distance between nearby LED module is 165mm.

RM Detail:

Optical and Physical Specification:

Optoelectronic Parameters:

Lab performance of the lens:

Application and Installation Instruction

-Suitable for indoor and outdoor channel letter, commercial signage and sign board

-Clean the touch surface of the object before pasting the modules onto the surface.

-Peel off the PE tape from the adhesive foam of the back side of modules, prefix the modules on the object by adhesive foam, adjust the modules place and distance as per actual need. 

-Inject glass sealant or mount the modules on object with screws for Permanent fix.

Tips:

-Suitable for 10-20cm depth light box;

-Single module as a unit can be cut off from the module string according to the project actual needed.

-Wires conductor have to seal/cover by insulator completely in case of short circuit or electric spark.

-Max quantity of one circuit can support 50pcs modules by electricity reinforce, over this quantity the voltage drop down phenomenon will be obvious revealed and significantly increased which will severely impact the light effect of the modules.

Schematic Diagram of Application: