Item Name: | 8522-3LED |
YYB Code: | PDT.CP_62 |
Power: | 1.5W |
Voltage: | 220V |
Size: | 85*22*9mm |
Colour: |
Design Features
- High Quality 2835SMD LED mounted, golden wire with copper base;
- Constant voltage circuit for flexible cut of the module string;
- Aluminum PCB with 1.5mm thickness, fast heat dissipation;
- Optical lens of 175 degree angle with even light project to cover board surface;
- Connector female and male on either side of the module string;
- Maximum module quantity per string up to 20pcs;
- Center distance between nearby LED module is 193mm.
RM Detail:
LED Type | PCB Quality | Wires Gauge | Wires Length | Housing Plastic | Lens Quality |
SMD2835 | 1.5mm Aluminum | AWG18 | 108mm | ABS Resin | Optical PC |
Optical and Physical Specification:
Viewing Angle | Color Rendering Index(CRI) | Optical Attenuation | Working Temperature | Storage Temperature | Quantity Per String |
160° | 85Ra | 0.5% | –20~40° | –25~60° | 20pcs |
Technical Parameters:
LED Color | Color Temperature(K) Wavelength (NM) | Luminous Flux (lm/piece) | Power (W) | Luminous Intensity |
Cold White | 8000-9500K | 130-135lm | 1.5W | 120lm/w |
White | 6000-6500K | 130-135lm | 1.5W | 120lm/w |
Warm White | 3000K | 130-135lm | 1.5W | 120lm/w |
Red | 620-625nm | 2700-3000MCD/LEDs | 1.2W | 2800MCD/w |
Green | 520-530nm | 5000-5600MCDLEDs | 1.5W | 4200MCD/w |
Blue | 455-465nm | 4200-4700MCDLEDs | 1.5W | 3500MCD/w |
Application and Installation Instruction
- Suitable for indoor and outdoor channel letter, commercial signage and sign board
- Clean the touch surface of the object before pasting the modules onto the surface.
- Peel off the PE tape from the adhesive foam of the back side of modules, prefix the modules on the object by adhesive foam, adjust the modules place and distance as per actual need.
- Inject glass sealant or mount the modules on object with screws for Permanent fix.
Tips:
- Please select a 2x1.5mm² or above thickness wires as the main power cable
- Single module as a unit can be cut off from the module string according to the project actual needed.
- Wires conductor have to seal/cover by insulator completely in case of short circuit or electric spark.
- Max quantity of one circuit can support 80~100pcs modules by electricity reinforce, over this quantity the voltage drop down phenomenon will be obvious revealed and significantly increased which will severely impact the light effect of the modules.