Item Name: | BA6010 RGB Strip |
YYB Code: | PDT.CP_95 |
Power: | 14W/meter |
Voltage: | DC12V |
FPCB Size: | 10mm |
LED Qty: | 60LED/meter |
Colour: | Addressable RGB |
Design Features
-Big size 5050 SMD LED mounted, golden wire with copper base, CRI>75;
-DC12V Constant voltage circuit for flexible cut off as application need;
-PWM control 256 grade grayscale , control signals through external MCU/controller to achieve various colorful effects.
-Every 3LED drive by one IC as a union, strip can be cut at the solder joint point.
-The number of the cascade point maximum reach out 1024points.
-FPCB adopt double side copperplate width is 10mm and thickness is 35/35 2Oz;
-Strip maximum length up to 5meters, without voltage dropping matter;
RM Detail:
LED Type | FPCB Quality | IC Type | Drive Mode | Cut mark | Cut support |
SMD5050 | 2Oz-35/35 | 2811/1903 | 1IC:3LED | 5cm/cut | 3led/cut |
Optical and Physical Specification:
Viewing Angle | Color Rendering Index(CRI) | Optical Attenuation | Working Temperature | Storage Temperature | IP Rank |
125° | >75Ra | 0.5% | –20~40° | –25~60° | IP20 |
Optoelectronic Parameters:
LED Color | Color Temperature(K) Wavelength (NM) | Luminous Flux (lm/led) | Power (W/LED) | Luminous Intensity |
RED | 620-625nm | 600-800MCD | 0.3 | 200lm/meter |
GREEN | 520-525nm | 1800-2200MCD | 0.3 | 480lm/meter |
BLUE | 460-465nm | 500-700MCD | 0.3 | 180lm/meter |
Application and Installation Instruction
-Suitable for indoor cell roof invisible light decoration, bedroom background light.
-Clean the touch surface of the object before pasting the strip onto the surface.
-Peel off the PE tape from the adhesive tape of the back side of the strip.
-Press the strip onto the surface of the object to fix it.
Tips:
-Strip can be cut off from the solder joint mark, according to the application actual needed.
-Strip can’t apply to outdoor and high moisture environment in case of short circuit or electric spark.
-Be aware of the heat dissipation. Do not install the strip at where is high temperature affected and poor heat dissipation condition.
-Free from the strong electromagnetic covered zone, in case any signal interruption problem.