SHENZHEN YYBLED TECHNOLOGY CO., LTD.
Direct Line: 0086-0755-83207420        E-mail: Brank.youth.yang@hotmail.com        WhatsApp:008613427874236

SHENZHEN YYBLED TECHNOLOGY CO., LTD.

Direct Line: 0086-0755-83207420
E-mail: Brank.youth.yang@hotmail.com
WhatsApp:008613427874236
C3208 COB strip
>
<
C3208 COB strip
C3208 COB strip

Item Name:

C3208 COB strip

YYB Code:

PDT.CP_101

Power:

10W/meter

Voltage:

DC12V

FPCB Size:

8mm

LED Qty:

320LED/meter

Colour:

N1206 Silicon strip(图1)


Inquiry Now
Product Details
Application

Design Features

-Adopt 9*22μm chip , golden wire with copper base, CRI>90;

-Chips soldered by high density allocation on the FPCB, light emitting much more smooth and consistent than conventional SMD strip;

-DC12V/24V Constant voltage circuit for flexible cut off as application need, strip has to be cut at the solder joint point;

-FPCB thickness is 2Oz 25/35;

-The COB strip product body thickness is super thin, suitable for special scenario;

-Luminous surface width of 4.5±0.3mm.



RM Detail:

Chip Type

FPCB Quality

Cut mark 12V

Cut mark 24V

Chips quantity

9*22μm

2Oz 25/35

2.5cm

5cm

320pcs


Optical and Physical Specification:

Viewing Angle

Color Rendering Index(CRI)

Optical Attenuation

Working Temperature

Storage Temperature

IP Rank

140°

>90Ra

0.5%

–20~40°

–25~60°

IP20


Optoelectronic Parameters:

LED Color

Color

Temperature(K)

Wavelength (NM)

Luminous Flux (lm/led)

Power (W/LED)

Luminous

Intensity

Cool White

9000K-12000K

100-110lm

10W

1000lm/meter

White

6000K

90-95lm

10W

950lm/meter

Warm White

3000K

80-85lm

10W

850lm/meter


Application and Installation Instruction

-Suitable for indoor cell roof invisible light decoration, bedroom background light, Neon signage.

-Clean the touch surface of the object before pasting the strip onto the surface.

-Peel off the PE tape from the adhesive tape of the back side of the strip.

-Stick Mylar tape to isolate the cut mark from object surface.

-Press the strip onto the surface of the object to fix it.



Tips:

-Strip can be cut off as per the backside outstanding cut mark direction, according to the application actual need.

-Strip can’t apply to outdoor if does not make waterproof finish, in case of short circuit or electric spark.

-Be aware of the heat dissipation. Do not install the strip at where is high temperature affected and poor heat dissipation condition.

-Do not twist over the strip along the round object with diameter small than 5cm.

-Soft solder trims available to connect the strip without heat solder.