Design Features

-Big size 5050 SMD LED mounted, golden wire with copper base, CRI>75;

-DC12V Constant voltage circuit for flexible cut off as application need;

-Coated by silicon rubber on the top side of the strip,coating protection enable moisture and dusty place workable;

-FPCB adopt double side copperplate width is 10mm and thickness is 35/35 2Oz;

-Strip maximum length up to 5meters, without voltage dropping matter;

RM Detail:

Optical and Physical Specification:

Optoelectronic Parameters:

Application and Installation Instruction

-Suitable for indoor cell roof invisible light decoration, bedroom background light.

-Clean the touch surface of the object before pasting the strip onto the surface.

-Peel off the PE tape from the adhesive tape of the back side of the strip.

-Press the strip onto the surface of the object to fix it.

Tips:

-Strip can be cut off from the solder joint mark, according to the application actual needed. A end cap accessory required after the strip being cut to ensure the waterproof function.

-Strip can’t apply to outdoor in case of short circuit or electric spark.

-Be aware of the heat dissipation. Do not install the strip at where is high temperature affected and poor heat dissipation condition.

-Free from the strong electromagnetic covered zone, in case any signal interruption problem.