Item Name: | I30012 Indoor power supply |
YYB Code: | PDT.CP_111 |
Power: | 300W |
Input Volt: | AC180-240V |
Output Volt: | DC12±0.5 |
O/Current: | 25A |
O/Frequency: | 50/60Hz |
Design Features
-Small load power consumption, low power wast during operation;
-Adopt 105℃ long lifespan electrolytic capacitors;
-Safety protection support Short circuit / Overload /Over voltage / Over Temp;
-Withstand very momentary surge input 240VAC~300VAC;
-Operation temperature range from -15℃ to 65℃;
-Air cooling;
-High quality aluminum profile housing;
Technical Parameter:
O/Power | O/Volt | I/Volt Range | Efficiency | EMC Standard |
300W | DC 12V | 180-240V AC | 85% | EN55022 CLASS A |
Protection Standard:
Withstand Volt | Withstand Volt | Withstand Vibration | AC Impulse Current | Overload Protection |
I/P-O/P: 1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | <0.5mA/240VAC | 10~500HZ, 2G 10Min/1Cycle, Period For 60 Minutes, Each Axes | Cold Start Current 13A/115V AC, 26A/230V AC | 105%~150% Rated Output Power |
Application and Installation Instruction
-Suitable for indoor channel letter,light box, commercial signage and sign board
-Flip over the protection plate of the power supply to entirely expose the I/O pole.
-Inset the wires of load facility into the output pole, mind the pole of negative and positive.
-Inset the cable of the input voltage into the input pole,mind the pole of the live and neutral, and the earth.
-Fix the power supply follow the upside direction and kick down the protection plate of the power supply.
Tips:
-Figure out the load actual consumption, the total consumption expected not over the 80% of the power supply nominal value.
-Shut down the electricity before installing the power supply.
-Please install the power supply follow the upside direction,don’t make it upside down. Select a suitable cable to connect the outlet/socket.
-Don’t place the power supply in a high moisture or heavy dust covered environment
-Please be sure kick down the protection plate after wires connection finished to cover the I/O pole of the power supply.
Schematic Diagram of Application: