Item Name: | IR44 RGB Controller |
YYB Code: | PDT.CP_122 |
Power: | 72W |
Voltage: | DC12V |
Ctrl Size: | L50xW35xH22mm |
Panel Size: | L124.5xW56xH7mm |
Function: | Digital RGB color control |
Design Features
-Adopt Infrared(IR) signal transmitter and receiver, 44 keys remote panel model;
-IC component involves superior micro control unit,enable the controller with memory store function;
-Remote control(5meter around) supportable;
-Function contains adjustment of brightness of the color,pick of solid color ,mode changing of RGB color, the speed of RGB color changing;
-Button cell input in the panel with film isolating the circuit connection;
Tech Parameters:
Input Volt | Working Temperature | Output Current | Power (W) | Output Signal |
DC12V | -20-60℃ | ≤6A | 72W | R/G/B/+ |
Color Model:
1st Column key | 2nd Column key | 3rd Column key | 4th Column key | |
light bright | light dark | Pause/Play | Power on/off | |
Red | Green | Blue | White | |
Reddish yellow | Jade | Indigo | Cream | |
Ochre | Cyan | Hyacinth | blush | |
Orange | Scuba blue | Violet | Evergreen fog | |
Yellow | Sky blue | Tan | Wathet blue | |
Red bright | Green bright | Blue bright | Speed up | |
Red dark | Green dark | Blue dark | Speed down | |
DIY manual Clr 1 | DIY manual Clr 2 | DIY manual Clr 3 | Auto | |
DIY manual Clr 4 | DIY manual Clr 5 | DIY manual Clr 6 | Strobe | |
RGB Flash | Digital RGB Flash | RGB Fade | Digital RGB Fade |
Schematic Diagram
Application and Installation Instruction
-Suitable for RGB led light strip, RGB led module, RGB led light bar.
-Connect the supportable load of facility in priority, check out the wires connection to ensure no short circuit problem.
-Connect the controller to the power supply, take out the film from the battery case of the remote panel.
Tips:
-The controller input voltage is DC12V, please be sure pick the right power supply.
-Please be aware of the connect pole of the connector, the ARROW direction should be fit with positive pole mark of the load.
-Do not overload operate the controller.