SHENZHEN YYBLED TECHNOLOGY CO., LTD.
Direct Line: 0086-0755-83207420 E-mail: Brank.youth.yang@hotmail.com WhatsApp：008613427874236
Item Name: | Music-IR44 RGB Controller |
YYB Code: | PDT.CP_123 |
Power： | 72W |
Voltage: | DC12V |
Ctrl Size: | L50xW35xH22mm |
Panel Size： | L123.5*W55*H7mm |
Function： | Digital RGB color control |
Design Features
-Adopt Infrared(IR) signal transmitter and receiver, Music/sound sync connection is also supportable,44 keys remote panel model;
-IC component involves superior micro control unit,enable the controller with memory store function;
-Sound detect component in-built controller, enable controller sensitive to the sound change and release signal to change the light color sync to the sound melody.
-Remote control(5meter around) supportable;
-Function contains adjustment of brightness of the color,pick of solid color ,mode changing of RGB color, the speed of RGB color changing, light effect change by sound strength detection；
-Button cell input in the panel with film isolating the circuit connection;
Tech Parameters:
Input Volt | Working Temperature | Output Current | Power (W) | Output Signal |
DC12V | -20-60℃ | ≤8A | 96W | R/G/B/+ |
Color Model:
| 1st Column key | 2nd Column key | 3rd Column key | 4th Column key |
RGB light bright/ Sync sensation up | RGB light dark/ Sync sensation dull | RGB Power off | RGB Power on | |
Red | Green | Blue | White | |
Reddish yellow | Jade | Indigo | Cream | |
Ochre | Cyan | Hyacinth | blush | |
Orange | Scuba blue | Violet | Evergreen fog | |
Yellow | Sky blue | Tan | Wathet blue | |
White bright | White dark | White power off | White power on | |
White 25% | White 50% | White 75% | White 100% | |
RGB Flash | RGB Fade | Digital flash | Speed up | |
Digital Fade | Digital+W flash | Auto | Speed down | |
Sound Rec 1 | Sound Rec 2 | Sound Rec 3 | Sound Rec 4 |
Schematic Diagram
Application and Installation Instruction
-Suitable for RGB led light strip, RGB led module, RGB led light bar.
-Connect the supportable load of facility in priority, check out the wires connection to ensure no short circuit problem.
-Connect the controller to the power supply, take out the film from the battery case of the remote panel.
Tips:
-The controller input voltage is DC12V, please be sure pick the right power supply.
-Please be aware of the connect pole of the connector, the ARROW direction should be fit with positive pole mark of the load.
-Do not overload operate the controller.
