Design Features

-High Quality 2835SMD LED mounted, golden wire with copper base, CRI>90;

-DC12V Constant voltage circuit for flexible cut off as application need;

-Every 3LED with one resistor as a union, strip can be cut at the solder joint point.

-FPCB thickness is 3Oz;

-Silicon extrude with strip synchronous pull out.

RM Detail:

Optical and Physical Specification:

Optoelectronic Parameters:

Application and Installation Instruction

-Suitable for indoor cell roof invisible light decoration, bedroom background light, Neon signage.

-Installation instruction way one:

-Engrave out skeleton on the acrylic plate or wooden board.

-Clean up the ditch and inject glue inside the ditch

-Press the strip into the ditch on the object to fix it.

-Installation instruction way two:

-Screw on the clasp on the object where you intend to apply the strip

-Kick the strip inside the clasp to make the strip clipped by clasp.

Tips:

-Strip can be cut off as per the backside outstanding cut mark direction, according to the application actual need.

-Strip can’t apply to outdoor and high moisture environment if does not make waterproof finish at both end of the strip, in case of short circuit or electric spark.

-Be aware of the heat dissipation. Do not install the strip at where is high temperature affected and poor heat dissipation condition.