0603LED is a monochromatic SMD LED lamp bead, and there are two common sizes: 1.6x0.8x0.6mm or 1.6x0.8x0.4mm. Our optoelectronic LED lamp beads are packaged with high-definition environmentally friendly silica gel and wafer chips, and can be customized in various colors such as white, red, yellow, green, orange, blue, and purple. Usually welded at 260 degrees and within 3 seconds, it is widely used in electronic product backlights, such as mobile phones, computer peripherals and drones, information indicators such as smart home appliances, communication equipment, high-end digital, automotive electronic interiors and industrial and Medical equipment and more.

Special instructions: 1. Confirmation of materials, whether the LED BIN grades are consistent with each other. The brightness may be different when used together, and the luminous color of different CIE BINs may be different when used together).

2. Before unpacking, prevent moisture from entering the interior of the LED. It is recommended that the LEDs of the SMD series be stored in a drying cabinet with a built-in desiccant. The storage environment temperature range is 5-30 degrees, and the humidity does not exceed 50%.

3. Dehumidify the whole roll as much as possible after opening the package. Dehumidification conditions: bake at 70 degrees for 4-12 hours. The dehumidified material should be used up as soon as possible (within 24 hours). Please seal or place the remaining material in an environment of 10-40 degrees and humidity not exceeding 30%.