0805 RGB SMD LED lamp bead tri-color light-emitting diode is small in size and light in weight. There are three categories from the luminous intensity angular distribution: (1) high directivity. Generally, it is a pointed epoxy package, or a package with a metal reflective cavity, and no scattering agent is added. The half-value angle is 5~20" or less, with high directivity. It can be used as a local illumination light source, or combined with a light detector to form an automatic detection system. (2) Standard type. Usually used as an indicator For lamps, the half-value angle is 20°~45°. (3) Scattering type. This is an indicator light with a larger viewing angle, the half-value angle is 45°~90° or more, and the amount of scattering agent is large.

Low light decay 3000 hours, the average decay is less than 2% to prolong the service life, the ultra-low calorific value is small, the brightness is high, and the continuous use time of the product is improved. Ultra-long service life, the service life can be up to 50,000 hours under normal circumstances. Fast lighting, instant lighting time <100 nanoseconds (NS). Excellent electrostatic protection, safer and more assured. Process meets ROHS standard.

1. Cleaning: Do not use unknown chemical liquids to clean the SMD LED; when necessary, immerse the SMD LED in alcohol for less than 1 minute in a normal room and dry it naturally for 15 minutes before starting to use. After the packaging bag is sealed, it should be stored under the conditions of temperature <40°C, humidity <%90, and the shelf life is 12 months. When the shelf life is exceeded, it needs to be re-baked.

2. Storage: Before opening the package, please check whether there is air leakage in the packaging bag. If there is air leakage, please re-bake before use. After opening, please use it under the following conditions: temperature <30℃, humidity below 60%RH; if the use time exceeds 24 hours, it needs to be baked before use. Baking conditions: the product is in the oven at a temperature of 70℃±5℃; relative humidity ≤10%RH, time: 24 hours, take out the product from the packaging bag and bake again, and the oven door cannot be opened during the baking process.